1108.213.0000 Oil cooler T8 series AKG

1108.213.0000 Маслоохладитель 

Характеристики охладителей Т-серии

· Высокопроизводительные охладители из Алюминия
· Высокий терлосъём и высокое давление
· Максимальное допустимое давление охладителей Т1-Т8 2,6 МПа; 
· Универсальные охладители для гидравлического, смазочного и других масел
· Охладители комплектуются электромотором, гидравлическим мотором или электровентилятором 380 Вольт.

You can buy an oil cooler or air-oil heat exchangers from the Kostanay warehouse. Oil coolers - heat exchangers for cooling hydraulic oil reduce the operating temperature of hydraulic oil to optimal values. Cooling of oil in hydraulic systems is always required, since hydraulic oil is constantly heated by the pumps and hydraulic motors it washes, or when passing through throttle elements, spools, valves, etc. The hydraulic fluid in the hydraulic system is cooled by blowing an efficient fan onto the radiator, through which oil flows under pressure of up to 25 bar. They are used both in mobile equipment, with a fan driven by a 12V or 24V electric motor, and in machine tools with a fan driven by a 220V or 380V electric motor. Cooling of the oil occurs as a result of heat exchange between the air flow created by the fan and the heat emitted by the outer walls of the radiator. The fan can operate in intermittent mode maintaining an optimal temperature in the range of 60-65 degrees Celsius, for example, using an on/off relay for the electric motor 8030006.