D25 Oil cooler 25 kW AKG

ХАРАКТЕРИСТИКИ СЕРИИ D

- Высокомощные охлаждающие блоки
- Вентилятор с двигателем постоянного тока
- Отвод тепла из охлаждаемой среды в атмосферный воздух
- Охладитель универсален и может быть использован для гидравлического, трансмиссионного, моторного, смазочного масел и контуров охлаждения
- Для охлаждения минерального масла, синтетического масла, биологического масла, а также химических жидкостей HFA, HFB, HFC, HFD и воды с минимальным содержанием антифриза 50% и антикоррозионными присадками (возможны другие среды)
- Выдерживают рабочее давление до 26 бар

You can buy an oil cooler or air-oil heat exchangers from the Kostanay warehouse. Oil coolers - heat exchangers for cooling hydraulic oil reduce the operating temperature of hydraulic oil to optimal values. Cooling of oil in hydraulic systems is always required, since hydraulic oil is constantly heated by the pumps and hydraulic motors it washes, or when passing through throttle elements, spools, valves, etc. The hydraulic fluid in the hydraulic system is cooled by blowing an efficient fan onto the radiator, through which oil flows under pressure of up to 25 bar. They are used both in mobile equipment, with a fan driven by a 12V or 24V electric motor, and in machine tools with a fan driven by a 220V or 380V electric motor. Cooling of the oil occurs as a result of heat exchange between the air flow created by the fan and the heat emitted by the outer walls of the radiator. The fan can operate in intermittent mode maintaining an optimal temperature in the range of 60-65 degrees Celsius, for example, using an on/off relay for the electric motor 8030006.